WatchOutsideUS

guide · updated 2026-11-22

Changing DNS on a smart TV

The only workaround that works on a television you cannot install anything on: where the setting lives per brand, and why it sometimes silently fails.

Short answer

Every major TV brand hides the DNS setting under network settings for the connected Wi-Fi network. Enter the resolver addresses manually, restart the app, and register your current IP with the provider. If the TV forces its own resolver or uses DNS over HTTPS, the trick quietly does nothing.

A television cannot run a tunnel app, cannot change its app store region easily, and usually cannot even tell you what failed. That makes the DNS setting the only lever you have on the device itself, and it works on more sets than people expect.

Where the setting lives

Samsung (Tizen): Settings, General, Network, Network Status, IP Settings, DNS Mode, Enter manually. LG (webOS): Settings, Connection, Wired/Wi-Fi connection advanced, untick "Set Automatically", DNS server. Sony / Philips (Android TV): Network settings for the active network, IP settings, static, DNS 1 and 2. Android also has Private DNS, which overrides everything else. Hisense / TCL (Roku TV): Network, the connected network, Advanced, DNS. Fire TV: Settings, Network, the connected network, Advanced, IPv4, Manual. This is the friendliest platform in the whole category. Apple TV: Settings, Network, Wi-Fi, the network, Configure DNS, Manual.

The steps that actually matter

  1. Register your home IP address with the DNS provider first. Without that, the resolver does not know whose lookups to answer.
  2. Set both DNS entries; a single entry fails when the provider has an outage.
  3. Fully close the streaming app rather than going "back" to the menu: many apps cache the resolved address for the session.
  4. Reboot the TV if the app can be closed properly only by power cycling.

Why it silently fails

Three common reasons, all invisible to the viewer:

  • The app uses DNS over HTTPS. The request never touches the TV's DNS setting. Several major apps do this now.
  • The router overrides it. If the router hands out its own resolver and forces traffic through it, the TV setting is ignored.
  • IPv6. The TV may prefer an IPv6 resolver from the ISP, bypassing the IPv4 entries entirely. Disabling IPv6 on that network is often the fix.

When to stop trying

If the service checks the connection rather than the lookup, no DNS work will help. The service page for that provider will say whether the block is soft enough for this trick; if it says the tunnel layer is required, save the evening.